Pair the Charging Stations
27
7.
Strip the end of the Ethernet insulation.
8.
Crimp the Ethernet wire in a straight-through
pattern into RJ45 connectors at both ends. Note
the location of Pin 1 relative to the clip in the
image, and the order of the blue and green wires in
the pattern.
9.
Test the Ethernet wire for functionality.
10.
Plug the Ethernet wire into the
Ethernet
port of
the Station Management Unit.
Note:
It is easier to access the Ethernet port if the
Power Module mechanism handle is temporarily in
the down position.
1
250_IGcombo.pdf 33
11/18/2019 3:37:41 PM