remove a media setting from the list, select a media name from the drop-down list and then
click Delete
.
Note that only when the media setting is not being applied to an event setting can
it be deleted.
Server Settings
In the Server column, click Add to open the server setting page
.
In this page, you can specify
where the notification messages will be send when a trigger is activated. A total of five server
settings can be configured.
Server name: Enter a descriptive name for the server setting.
Server Type: There are four choices of server types available: Email, FTP, HTTP, and Network
storage.
Email: Select to send the media via Email when a trigger is activated.
■
Sender email address: Enter the email address of the sender.
■
Recipient email address: Enter the email address of the recipient.
■
Server address: Enter the domain name or IP address of the email server.
■
User name: Enter the user name of the email account.
■
Password: Enter the password of the email account.
To verify if the email settings are correctly configured, click Test. The result will be shown in a
pop-up window. If it works, you will also receive an email indicating the result.
