dialog. After completed the installation, please click on the “Close” button.
Completed
Using Installation Wizard
User Interface
Once you run the Installation Wizard, after a short searching time, you will
see the user interface as below.
“Manual Setup”
button, a
“Refresh
Devices”
button and an arrow button on the left panel of your user interface.
When you click on the arrow button, you will see more advanced functional
buttons:
“Firmware Upgrade”
,
“Restore Default”
and
“About IW”
. You
can select your device by double-clicking it in the device list. The left three
buttons (
“Manual Setup”
,
“Firmware Upgrade”
, and
“Restore Default”
)
won’t be enabled until you select at least one device.
