White balance: Adjust the value for best color temperature.
■
Auto
The Network Camera automatically adjusts the color temperature of light in response to
different light sources. The white balance setting defaults to Auto and works well in most
situations.
■
Keep current value
Manually set the white balance to compensate for the ambient lighting conditions.
1. Set the White balance to Auto.
2. Place a sheet of white paper in front of the lens; then allow the Network Camera to adjust
the color temperature automatically.
3. Select Keep current value to confirm the setting while the white balance is being measured.
4. Click Save to take effect.
Brightness: Adjust the image brightness in fifteen steps from -7 (least bright) ~ +7 (brightest).
By default, the brightness is set to 0.
Sharpness: Adjust the image sharpness in fifteen steps from -7 (least sharp) ~ +7(sharpest).
By default, the sharpness is set to 0.
When completed with the settings on this page, click Save to take effect and click Close to quit
the page. Or press Close directly without incorporating any change.
Privacy mask
Click Privacy Mask to open the Privacy Mask page
.
In this page, you can block out some
sensitive zones for privacy concerns.
■
To set the privacy mask windows, follow the steps below:
1. Use camera control buttons (Up, Down, Left, Right, Home, Zoom in/out, and Go to) to move
the desired position to the center.
2. To resize and drag-drop the window, which is recommended to be at least twice the size of
the object (height and width) you want to cover.
3. Key the name of the window in the text box of Current position and click Add to show on the
Privacy Mask list.
4. Choose one of the fourteen colors to apply to all privacy mask windows.
5. Select Enable privacy mask to enable this function.
NOTE
►
Up to 24 privacy mask windows can be set, and only eight windows can be displayed in the
