EtherNet/IP interface
Leuze electronic
AMS 358
i
84
TNT
35/7-2
4
V
9.7.8.5
Configuration assembly
The configuration assembly is stored in class 4, instance 190.
Upon transfer to the control, the configuration assembly is completely preset to 0 (zero).
The entries listed in the "Default" column must absolutely be manually transferred to the
control if using the configuration assembly. It is not possible to automatically transfer the
default settings.
All other, system-specific parameters set by the given programmer must also be transferred
to the configuration assembly.
Notice!
In a narrower sense, offset value and preset values and their control are not permanent
parameters, as they must – in part – be changed depending on the system state. For this
reason, preset and offset values are not stored in the configuration assembly.
Make absolutely certain that parameters that are set in the AMS 358
i
via the control (explicit)
(set attribute single Class xx instance xx attribute xx) are also transferred to the configuration
assembly.
Only parameters that are also entered in the configuration assembly can be taken into
account in all operating situations of the AMS 358
i
. Parameters that are set by explicit calls
but are not entered in the configuration assembly may, therefore, act only temporarily. The
next time the configuration assembly is automatically downloaded to the AMS 358
i
, these
explicitly transferred parameters are again overwritten.
Byte
Cross-reference
address
Class/Instance/
Attribute
Function
Bit assignment (default)
Default
(hex)
7
6
5
4
3
2
1
0
0
35 / 1 / 12
Direction counting
-- -- -- -- -- -- -- 0
00
1
35 / 1 / 15
Position Format low byte
0
0
0
0
0
0
1
1
03
2
Position Format high byte
0
0
1
0
0
0
1
0
22
3
35 / 1 / 25
Velocity Format low byte
0
0
0
1
0
0
0
0
10
4
Velocity Format high byte
0
0
0
0
1
0
0
0
08
5
35 / 1 / 26
Velocity Free Resolution low byte
1
1
1
0
1
0
0
0
E8
6
Velocity free resolution
0
0
0
0
0
0
1
1
03
7
Velocity free resolution
0
0
0
0
0
0
0
0
00
8
Velocity Free Resolution high byte
0
0
0
0
0
0
0
0
00
9
35 / 1 / 107
Position Free Resolution low byte
1
1
1
0
1
0
0
0
E8
10
Position Free Resolution high byte
0
0
0
0
0
0
1
1
03
11
100 / 1 / 1
Language selection
-- -- -- -- -- 0
0
0
00
12
100 / 1 / 2
Password protection
-- -- -- -- -- -- -- 0
00
13
100 / 1 / 3
Password low byte
0
0
0
0
0
0
0
0
00
14
Password high byte
0
0
0
0
0
0
0
0
00
15
100 / 1 / 4
Display illumination
-- -- -- -- -- -- -- 0
00
16
100 / 1 / 5
Display contrast
-- -- -- -- -- -- 0
1
01
17
100 / 1 / 6
Extended heating control
-- -- -- -- -- -- -- 0
00
18
101 / 1 / 1
Activation of input assembly
0
0
0
0
0
0
0
1
01
19
101 / 1 / 2
Activation of output assembly
0
1
1
0
0
1
1
0
78
20
101 / 1 / 3
Activation of configuration assembly
1
0
1
1
1
1
1
0
BE
21
103 / 1 / 1
Function I/O (input or output)
-- -- -- -- -- -- -- 1
01
