Lenovo ThinkSystem D3284 Скачать руководство пользователя

Страница: 13 / 159

Intended audience

NOTE:

For more information about enclosure user interfaces, see the following:

•

Storage Manager Guide or online help
The guide describes the Storage Management Console GUI.

•

CLI Reference Guide

CNC ports used for host connection

Certain models use Converged Network Controller (CNC) technology, allowing you to select the desired host

interface protocol from the available Fibre Channel (FC) or Internet SCSI (iSCSI) host interface protocols

supported by the system. Using the

set host-port-mode

CLI command, you can set all controller module CNC

ports to use either FC or iSCSI protocol. The DS6200/DS4200/DS2200 controller enclosures support the following

link speeds:

•

16Gb FC

•

8Gb FC

•

4Gb FC

•

10GbE iSCSI

•

1GbE iSCSI

Alternatively, for 4-port DS6200/DS4200 models you can use the CLI to set CNC ports to support a combination of

host interface protocols. When configuring a combination of host interface protocols, host ports 0 and 1 are set to

FC (either both 16Gb/s or both 8Gb/s), and host ports 2 and 3 must be set to iSCSI (either both 10GbE or both

1Gb/s), provided the CNC ports use qualified SFP connectors and cables required for supporting the selected host

interface protocol.
The 2-port DS2200 models do not support SFPs for multiple host interface protocols in combination. You must

select a common host interface protocol and SFP for use in all CNC ports within the controller enclosure.
See

“CNC technology” (page 73)

Figure 17 (page 28)

and

Figure 18 (page 28)

for more information.

TIP:

See the CLI Reference Guide for information about configuring CNC ports with host interface protocols of

the same type or a combination of types.

CNC controller modules ship with CNC ports initially configured for FC. When connecting CNC ports to iSCSI

hosts, you must use the CLI (not the SMC) to specify which ports will use iSCSI. It is best to do this before

inserting the iSCSI SFPs into the CNC ports (see

“Change the CNC port mode” (page 86)

for instructions).

HD mini-SAS ports used for host connection

DS6200/DS4200 enclosures provide eight high-density mini-SAS ports (4-ports per controller module). DS2200

enclosures provide four high-density (HD) mini-SAS ports (2-ports per controller module). The HD mini-SAS host

interface protocol uses the SFF-8644 external connector interface defined for SAS3.0 to support a link rate of

12Gb/s using the qualified connectors and cable options. See

Figure 19 (page 28)

and

Figure 20 (page 29)

for more

information.

Intended audience

This guide is intended for system administrators and storage administrators.

Содержание ThinkSystem D3284
































































































































































Результаты поиска

Содержание ThinkSystem D3284

Отзывы:

Похожие инструкции для ThinkSystem D3284

Бренды по названию

Популярные бренды

Lenovo ThinkSystem D3284, Руководство по установке и обслуживанию оборудования

Результаты поиска

Содержание ThinkSystem D3284

Отзывы:

Похожие инструкции для ThinkSystem D3284

Бренды по названию

Популярные бренды