Lenovo ThinkSystem D3284 страница 12 Скачать руководство пользователя | Manualshive

Страница: 12 / 159

background image

12

About this guide

About this guide

Introduction

This guide provides information about initial hardware setup, and removal and installation of customer-replaceable

units (CRUs) for the Lenovo ThinkSystem™ DS6200/DS4200/DS2200 controller enclosures, as well as the DS

Series Exp Unit (DS EXP) and D3284 expansion enclosures
In controller enclosures, controller modules can be purchased with either of two types of host interface: SAS or

FC/iSCSI. An FC/iSCSI controller module’s host ports use converged network adapters, and is informally referred

to as a converged network controller (CNC):

•

FC/iSCSI controller enclosure:



Qualified Fibre Channel SFP option supporting (8/16Gb)



Qualified Internet SCSI (10GbE) SFP option



Qualified Internet SCSI (1Gb) Copper RJ-45 SFP option

•

SAS (12Gb) controller enclosure

The DS6200, DS4200, and DS2200 are SBB-compliant (Storage Bridge Bay) enclosures. These enclosures support

large form factor disks or small form factor disks in 2U12, 2U24, and 5U84 chassis. These 2U chassis form factors

support controller enclosures and expansion enclosures.
The DS Series controller enclosures can optionally be cabled to supported DS EXP/D3284 expansion enclosures

for adding storage. See also

“Connecting the controller enclosure and optional expansion enclosures” (page 66)

for

maximum configuration information.

IMPORTANT:

Product configuration characteristics for controller and optional expansion enclosures:

•

DS6200/DS4200/DS2200 and optional DS EXP products use the same 2U24 and 2U12 chassis form factors.

•

DS6200 is only available in the 2U24 chassis.

•

DS6200 and DS4200 provide four host ports per controller I/O module (SBB RAID canister).

•

DS2200 provides two host ports per controller I/O module.

•

DS6200/DS4200/DS2200 models are configured with two controller modules per enclosure.

•

Optional DS EXP 2U models are configured with two expansion I/O modules (SBB expansion canisters) per

enclosure.

•

Optional D3284 5U models are configured with two expansion I/O modules, and hold up to 84 disk drives.

•

Optional D3284 5U model is an expansion enclosure supporting DS6200 and DS4200 (not supported by

DS2200). This high-density chassis is not configured or used as a controller enclosure.

Lenovo ThinkSystem enclosures support virtual storage, which uses paged-storage technology. For virtual storage,

a group of disks with an assigned RAID level is called a disk group.

DS6200/DS4200/DS2200 enclosure user interfaces

The DS6200/DS4200/DS2200 enclosures support applications for configuring, monitoring, and managing the

storage system. The web-based application GUI and the command-line interface are briefly described:

•

Storage Management Console (SMC) is the web interface for the enclosure, providing access to all common

management functions for virtual storage.

•

The command-line interface (CLI) enables you to interact with the storage system using command syntax

entered via the keyboard or scripting.

«
...
10
11
12
13
14
...
»

Содержание ThinkSystem D3284
































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkSystem D3284

Бренд: hager Страницы: 136

Port 6Gb/s 3.5"

Бренд: In Win Страницы: 9

Бренд: PPM Страницы: 20

NET-ACCESS N21SPH

Бренд: Panduit Страницы: 2

Бренд: Unison Страницы: 32

IP-Logic ZIG-ILC

Бренд: Zigen Страницы: 9

Бренд: Vantec Страницы: 23

Бренд: Peavey Страницы: 4

Бренд: Minebea Intec Страницы: 24

Multi Hard Disk Box 2.5

Бренд: Sandberg Страницы: 24

Бренд: Skywalker Страницы: 14

V6 BlacX Edition

Бренд: Thermaltake Страницы: 16

Бренд: Promise Technology Страницы: 2

Бренд: ARKY Страницы: 8

Бренд: ZALMAN Страницы: 11

RAX Secure 212-3QJ

Бренд: CRU Страницы: 2

Бренд: HornetTek Страницы: 6

Бренд: GAI-Tronics Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды