Lenovo ThinkServer TS150, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 76 / 148

2. Remove the front bezel. See “Front bezel” on page 42.
3. Disconnect the signal cable and power cable from the drive.
4. Disconnect the HDD fan cable from the system board.
5. Press the release tab 1 and slide the 5.25-inch convertor kit out of the drive bay.
Figure 40. Removing the convertor kit from the drive bay
6. Remove the drive from the 5.25-inch convertor kit.
1
Squeeze the release buttons as shown to open the rear cover of the convertor kit.
2
Slide the drive out of the convertor kit.
1 2
Figure 41. Removing the drive from the convertor kit
7. Flex two sides of the drive bracket to remove the drive from the bracket.
8. If needed, install a new drive into the 5.25-inch convertor kit. See “Installing a storage drive into drive
bay 4” on page 63.
9. If you are instructed to return the old drive, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
62
ThinkServer TS150 User Guide and Hardware Maintenance Manual