Lenovo ThinkServer TS150, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 81 / 148

7. Remove the storage drive from the HDD and slim ODD convertor kit.
1
Squeeze the release buttons as shown to open the rear cover of the convertor kit.
2
Slide the drive out of the kit.
1 2
Figure 50. Removing the drive from the convertor kit
8. Flex two sides of the drive bracket to remove the storage drive from the drive bracket.
9. If needed, install a new slim optical drive and storage drive. See “Installing a slim optical drive and
storage drive into drive bay 5” on page 67.
10. If you are instructed to return the old drives, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
Installing a slim optical drive and storage drive into drive bay 5
Note:
For a 2.5-inch hard disk drive or solid-state drive, install the drive into a 2.5-inch to 3.5-inch drive
adapter first. See “Installing a 2.5-inch drive into a 2.5-inch to 3.5-inch drive adapter” on page 46.
To install a slim optical drive and storage drive into drive bay 5, do the following:
1. Prepare your server. See “Preparing your server and removing the server cover” on page 41.
2. Remove the front bezel. See “Removing the front bezel” on page 42.
3. Slide the slim optical drive into the HDD and slim ODD convertor kit until it snaps into position.
Figure 51. Installing the slim optical drive into the convertor kit
Chapter 5
.
Replacing hardware
67