Lenovo ThinkServer TS150, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 102 / 148

4. Remove the screw that secures the intrusion switch and remove the intrusion switch from the chassis.
Figure 80. Removing the intrusion switch
5. To install a new intrusion switch, see “Installing the intrusion switch” on page 88.
6. If you are instructed to return the old instruction switch, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
Installing the intrusion switch
To install a new intrusion switch, do the following:
1. Prepare your server. See “Preparing your server and removing the server cover” on page 41.
2. Remove the old intrusion switch in your server if necessary. See “Removing the intrusion switch”
on page 87.
3. Align the screw hole in the new intrusion switch with the corresponding hole in the chassis. Then install
the screw to secure the intrusion switch to the chassis.
®
5
6
7
8
3
4
Figure 81. Installing the intrusion switch
4. Connect the intrusion switch cable to the intrusion switch connector on the system board. See “System
board components” on page 20.
Power supply assembly
Your server supports one of the following power supply configurations:
88
ThinkServer TS150 User Guide and Hardware Maintenance Manual