Lenovo ThinkCentre M800 Скачать руководство пользователя страница 152

Страница: 152 / 178

Figure 106. Pivoting the drive bay assembly downward

25. Install the optical drive. See “Replacing the optical drive” on page 104.

26. Install the front bezel. See “Replacing the front bezel” on page 88.

27. Install the computer cover. See “Removing the computer cover” on page 88.

28. Connect the external cables and the power cord to the computer.

Replacing the power supply assembly

Attention:

Do not open your computer or attempt any repair before reading and understanding the Chapter

1 “Read this first: Important safety information” on page 1.

Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety and proper Underwriters Laboratories (UL) certification.

CAUTION:

Hazardous moving parts. Keep fingers and other body parts away.

CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.

144

ThinkCentre M800 and M900 Hardware Maintenance Manual

Содержание ThinkCentre M800


















































































































































































Результаты поиска

Содержание ThinkCentre M800

Отзывы:

Lenovo ThinkCentre M800, Руководство по техническому обслуживанию аппаратной части, Страница: 152 / 178

Результаты поиска

Содержание ThinkCentre M800

Отзывы: