Lenovo ThinkCentre M800 Скачать руководство пользователя страница 82

Страница: 82 / 178

Wireless LAN problem

Note:

The wireless LAN feature is supported only on some models.

The wireless LAN feature does not work

Solutions:

• Enable the wireless LAN feature in the Setup Utility program. See “Starting the Setup Utility program” on

page 61. Then, follow the instructions on the screen.

• For Windows 10, enable the wireless LAN feature in Windows Settings. Click the Start button to open the

Start menu, and then click

Settings

➙

Network & Internet

➙

Wi-Fi

. Turn on the Wi-Fi feature.

• Enable the wireless LAN adapter.

1. Depending on your Windows version, do one of the following:

– For Windows 7: Click the Start button to open the Start menu.

– For Windows 10: Right-click the Start button to open the Start context menu.

2. Click

Control Panel

. View Control Panel using Large icons or Small icons, and then click

Network

and Sharing Center

➙

Change adapter settings

3. Right-click the wireless LAN adapter icon and click

Enable

• Update or reinstall the wireless LAN driver. See “Keeping your computer current” on page 52.

Bluetooth problems

Note:

The Bluetooth feature is supported only on some models.

The Bluetooth feature does not work

Solutions:

• Enable the Bluetooth feature in the Setup Utility program. See “Starting the Setup Utility program” on

page 61. Then, follow the instructions on the screen.

• Turn on the Bluetooth radios.

1. Depending on your Windows version, do one of the following:

– For Windows 7: Click the Start button to open the Start menu. Right-click

Computer

, and then

click

Properties

– For Windows 10: Right-click the Start button to open the Start context menu.

2. Click

Device Manager

. Type the administrator password or provide confirmation if prompted.

3. Right-click the Bluetooth radios under

Bluetooth Radios

and click

Enable

• Enable the Bluetooth adapter.

1. Depending on your Windows version, do one of the following:

– For Windows 7: Click the Start button to open the Start menu.

– For Windows 10: Right-click the Start button to open the Start context menu.

2. Click

Control Panel

. View Control Panel using Large icons or Small icons, and then click

Network

and Sharing Center

➙

Change adapter settings

3. Right-click the Bluetooth adapter icon and click

Enable

• Update or reinstall the Bluetooth driver. See “Keeping your computer current” on page 52.

Sound does not come from the Bluetooth headset or headphones

Solution: Set the Bluetooth headset or headphones as the default device.

1. Exit the application that uses the sound device (for example, Windows Media Player).

2. Right-click the volume icon in the Windows notification area on the taskbar.

ThinkCentre M800 and M900 Hardware Maintenance Manual

Содержание ThinkCentre M800


















































































































































































Результаты поиска

Содержание ThinkCentre M800

Отзывы:

Lenovo ThinkCentre M800, Руководство по техническому обслуживанию аппаратной части, Страница: 82 / 178

Результаты поиска

Содержание ThinkCentre M800

Отзывы: