Lenovo ThinkCentre M800 Скачать руководство пользователя страница 140

Страница: 140 / 178

9. Stick the new front Wi-Fi cable to the front of the computer. Then, install the front Wi-Fi antenna through

the hole in the computer as shown.

Figure 88. Installing the front Wi-Fi antenna

10. Connect the front Wi-Fi antenna cable to the Wi-Fi card.

11. Press the release tab

on the right side of the drive bay assembly and pivot the drive bay assembly

downward until it snaps into position.

Figure 89. Pivoting the drive bay assembly downward

12. Install the optical drive. See “Replacing the optical drive” on page 104.

13. Install the front bezel. See “Replacing the front bezel” on page 88.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 147.

132

ThinkCentre M800 and M900 Hardware Maintenance Manual

Содержание ThinkCentre M800


















































































































































































Результаты поиска

Содержание ThinkCentre M800

Отзывы:

Lenovo ThinkCentre M800, Руководство по техническому обслуживанию аппаратной части, Страница: 140 / 178

Результаты поиска

Содержание ThinkCentre M800

Отзывы: