Lenovo ThinkAgile CP, Замена аппаратных компонентов и процедуры технического обслуживания

Страница: 148 / 162

Figure 63. Dual—interconnect configuration — compute node and network interconnect connections
Storage block connections (dual-interconnect configurations)
Connect the storage controllers according to the populated controller location and corresponding port
mapping and interconnect. The cables to be used are clearly labeled; make sure that you use the correct
cables.
You need eight Category 6 patch cables and eight SFP+ transceivers. Attach a single SFP+ transceiver to
each patch cable.
The storage block port mapping is as follows:
Front storage controller location Back network port mapping Network interconnect port
Upper Upper storage controller, port 1 (S.
U.1) Primary interconnect, port 17
Upper storage controller, port 2 (S.
U.2)
Primary interconnect, port 20
Upper storage controller, port 3 (S.
U.3) Secondary interconnect, port 17
Upper storage controller, port 4 (S.
U.4) Secondary interconnect, port 20
Lower Lower storage controller, port 1 (S.
L.1) Primary interconnect, port 21
Lower storage controller, port 2 (S.
L.2) Primary interconnect, port 24
Lower storage controller, port 3 (S.
L.3) Secondary interconnect, port 21
140
Lenovo ThinkAgile CP Hardware Part Replacement and Component Maintenance Procedures