Lenovo ThinkAgile CP Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 162

Lenovo ThinkAgile CP Скачать руководство пользователя страница 112

Install a fan

Use this information to install a fan in the compute enclosure.

Guidelines” on

Static Sensitive Device

Ground package before

opening” on page 21

To avoid possible danger, read and follow the following safety statement.

•

S017

CAUTION:
Hazardous moving fan blades nearby.

•

S033

CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted
with metal, which might result in spattered metal, burns, or both.

Before you install a fan, remove the fan cover (see

http://thinksystem.lenovofiles.com/help/topic/7X21/remove_

the_fan_cover.html

Attention:

• Static electricity released into internal solution components when the solution is powered on may cause

the solution to halt, which may result in data loss. To avoid this problem, always use an electrostatic-
discharge wrist strap or other grounding system when you work inside the solution with the power on.

• Replace the failed fan and reinstall the fan cover in three minutes.

104

Lenovo ThinkAgile CP Hardware Part Replacement and Component Maintenance Procedures

«
...
110
111
112
113
114
...
»

Содержание ThinkAgile CP



































































































































































Отзывы:

Нет отзывов