background image

 

 

CHAP. 1 GENERAL INFORMATION 

CHAP. 1.1    GENERAL INFORMATION 

We wish to thank you, first of all, for purchasing an air-conditioner produced by our company. 

We are sure you will be happy with it because it represents the state of the art in the technology of home air conditioning. 

This manual serves to provide you with the instructions and explanations you need to make the best possible use of your air-
conditioner. 
We suggest that you read it carefully before starting to use the appliance. 

 

By following the instructions and suggestions provided in the manual, your air-conditioner will give you years of smooth operation 
and comfort at the lowest cost in terms of power consumption. 

 

ATTENTION 

The manual is divided into 3 sections or chapters: 

 

CHAP. 1 GENERAL INFORMATION 

Contains information for the specialized installer and end user. 
The information, technical data and important warnings must be known 

before 

installing and using the air-conditioner. 

 

CHAP. 2 INSTALLATION 

Contains information 

exclusively 

intended for the specialized installer. 

The information contained in this chapter is necessary for installation of the air conditioner. 
If the air-conditioner is installed by personnel lacking the necessary qualifications and specialization this invalidates the warranty. 

 

CHAP. 3 USE AND MAINTENANCE (by user) 

Contains all information and instructions for proper use and programming of the air-conditioner, as well as instructions for simple 
maintenance. 

This document is restricted in use to the terms of the law and may not be copied or transferred to third parties without the express 
authorization by manufacturing company. 
Our machines are subject to change and some parts may appear different from the ones shown here, without this affecting the text of the manual in any 
way. 

 

Read this manual carefully before performing any operation (installation, maintenance, use) and follow the instructions 
contained in each chapter. 

 

THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES TO PERSONS OR PROPERTY CAUSED BY FAILURE TO 
FOLLOW THE INSTRUCTIONS IN THIS MANUAL. 

 

The manufacturer reserves the right to make any changes it deems advisable to its models, although the essential 
features described in this manual remain the same. 

 

The installation and maintenance of air-conditioners like this one may be hazardous as they contain a cooling gas 
under pressure as well as powered parts. 
Therefore, the installation, first startup and subsequent maintenance should be carried out exclusively by authorized, 
qualified personnel. 

 

 

 

Содержание Compact Pro










































Отзывы: