background image

 

 

To adjust vertical airflow you can operate in two ways: 
- continuous oscillation of airflow, obtained by pressing 
  button T9 which starts and stops the movable grille. This 
  enables the fins on the  

grille to turn completely around. 

- stop the movable grille in the desired position by pressing 
  button T9 again while the fins are in motion. 
Pressing button T9 will start automatic  turning of the baffle. 

IMPORTANT: The baffle must not be turned by hand.

 

3.4.10 

Fan speed is controlled by button T5. 

  Control of fan 

Pressing this button gives the following sequence:  

 

speed  

once=Low, twice=Medium, three times=High, four 

 

times=Automatic. 

  The higher the speed setting, the greater the output of the 

air conditioner but also the louder its operation. If you select 
Automatic mode, the microprocessor in the air conditioner 
adjusts the speed automatically, keeping it as high as needed 
to reach the temperature setting with respect to the 
effective room temperature. As the room temperature 
nears the setting, fan speed is reduced automatically. 
When the unit is operating in dehumidification mode, fan 
speed adjustment is not possible as it can only function at 
low speed. 

3.4.11 

This function is available only on devices equipped with 

External air intake 

the optional external air intake, that is an exclusive feature for 
this type of air conditioner. Press button T8 once to start the 
microfan on the external air intake and open the shutter to 
refresh the air in the room. 
Press button T8 again to close the shutter. 
It should be borne in mind that opening the external air intake 
reduces the cooling effect of the air conditioner. 
This is also true of the heating effect for machines equipped 
with a heat pump. For this reason, if you want to maintain a 
constant flow of external air with the air conditioner in 
operation, you should first make sure your unit is powerful 
enough to operate this way. 
If not, you should close the external air intake when the 
temperature outside is extreme. 

 

Fig. 35 

Control of fan speed 

Fig. 36 

External air intake

 

Содержание Compact Pro










































Отзывы: