Lennox Compact Pro, Руководство по установке, эксплуатации и техническому обслуживанию

Страница: 35 / 41

To set the times for starting and stopping the two air
conditioner programs, proceed as follows:
a) Press button Time and Program Setting, as many times
as necessary to display the PROGR. 1 ON indicator (Time
to start 1st program).
b) Press toggle button T7 to increase or decrease the
numerical display of the time when you want program 1 to start.
Every time you press one end of the toggle button the time
setting increases or decreases by 30 minutes.
c) Press button T6 Time and Program Setting, as many times as
necessary to display the PROGR. 1 OFF indicator (Time to
stop 1st program).
d) Press toggle button T7 to increase or decrease the
numerical display of the time when you want program 1 to stop.
Every time you press one end of the toggle button the time
setting increases or decreases by 30 minutes.
e) Press button Time and Program Setting, as many
times as necessary to display the PROGR. 2 ON
indicator (Time to start 2nd program).
f) Press toggle button T7 to increase or decrease the
numerical display of the time when you want program 2 to start.
Every time you press one end of the toggle button the time
setting increases or decreases by 30 minutes.
g) Press button T6 Time and Program Setting, as many times
as necessary to display the PROGR. 2 OFF indicator
(Time to stop 2nd program).
h) Press toggle button T7 to increase or decrease the
numerical display of the time when you want program
1 to stop. Every time you press one end of the toggle
button the time setting increases or decreases by 30
minutes.
i) To return to the normal operating mode just press button
T6 as many times as necessary to cancel the program
indications from the display.
After making the settings for the operating programs, they can
be used or not, as needed.
Either or both of the programs can be used. In particular,
when you press T11 to run the programs, the following
things occur:
Use of Program no. 1 only
Use of Program no. 2 only
Use of Programs 1 and 2
Disuse of both programs.
Fig. 39
Setting of time schedules for 1st and 2nd Operating
Program (PROGR. 1 and PROGR. 2)
Fig. 40
Starting and stopping operating programs
3.4.15
Setting of time
schedules for 1st
and 2nd
Operating
Program
(PROGR. 1 and
PROGR. 2)
3.4.16
Starting and
stopping
operating
programs