background image

 

 

3.3  CONTROL OF AIR CONDITIONER USING 

THE REMOTE CONTROL UNIT 

3.3.1 

The remote control supplied with the air conditioner is 

  Remote control   

designed to be extremely sturdy and to ensure excellent 

 performance in use, but it should nevertheless be handled  with 
 some care. 

 

For example, do not: 
- leave it out in the rain, spill water on its keyboard or drop it 
into water. 
- subject it to impacts or drop it onto hard surfaces.  
- leave it exposed to direct sunlight.  
- place obstacles between the remote control and 
the air conditioner while using it. 

Furthermore: 

-  if other devices operated by remote control (TV, radio,  stereo 
  systems, etc.) are located in the same room as  the air 
  conditioner, there may be interference. 
-  electronic and fluorescent lighting may interfere with 
  communications between the remote  control and the air 
  conditioner. 
-  remove the batteries in case of prolonged disuse of the 
  remote control. 

3.3.2   

Use only 2 dry cell batteries type LR03 with 1,5 V (supplied   

Insertion of   

with the remote control unit). Dispose of used batteries

 

batteries 

only at the special collection points provided by the local 
authorities for this type of waste. 

REPLACE BOTH BATTERIES AT THE SAME TIME 

To insert the batteries remove the spring-latch cover on the 

back of the remote control. 

The batteries have to be inserted according to the positive and    
negative pole markings in the bottom of the battery compartment. 
Close the spring-latch cover after inserting the batteries. 

3.4  REMOTE CONTROL 

The remote control is the interface between the user and  the air 
conditioner. It is therefore particularly important to  familiarize 
yourself with the parts of the remote control that relate to this 
interface. 

3.4.1 

T1 

On/Off. 

Description of 

T2 

Well being mode (Automatic) 

the remote 

T3 

Night well-being mode 

Control 

T4 

Operating mode selector. 

 

T5 

Fan speed selector. 

 

T6 

Button for setting timer and programs. 

 

T7 

Button for increasing (+) or decreasing (-) the tem- 

 

T8 

perature/time settings. 
Button to start external air intake (functions only if 

 

T9 

the air conditioner is equipped with this accessory). 
Movable baffle adjustment On/Off button. 

 

T10 

Reset button. 

 

T11 

Program start button. 

 

D1 

Display: shows operating status and settings as 
they are made. 
Fan speed or automatic operating mode indicator 

 

D2 

(AUTO). 
Heating. 

 

D3 

Cooling. 

 

D4 

Dehumidifier only. 

 

 

 

Содержание Compact Pro










































Отзывы: