LEMKEN Heliodor 8, Руководство по эксплуатации

Страница: 76 / 104

Operation
74

Push the locking pieces (5) onto the
drawbar (1).

Ensure that the side with the support
surface (7) is facing the rail plate (6).

Push the drawbar (1) through the bores
until the two ends of the drawbar (1) on
the left and right are the same distance
from the rail plates (6).

Push the locking pieces (5) up to the rail
plates (6).

Ensure that the support surfaces (7) are
positioned on the stop (8) of the rail
plates (6).

Tighten the nuts (3) on the bolts (4) to a
tightening torque of 197 Nm.
11.5 Additional weights
Additional weights can be mounted in or-
der to improve the infeed of the implement
in challenging soil conditions.

Release the nuts (1) and (2).

Pull the rod (3) out of the bore in such a
way that the additional weight(s) can be
pushed onto the rod (3).

Align the additional weights centrally and
place them on flat steel bar (4).

To fix the weights, tighten the nuts (1)
and (2) to a torque of 926 Nm.
3
2
1
4
6
4
7
8
5
7
8
4
2
3
1