LEMKEN Heliodor 8 Скачать руководство пользователя страница 74

Страница: 74 / 104

Operation

Top link mounting position

CAUTION

Risk of injury due to unsecured top link pins

If the top link pin is not secured, it may slip out and go astray.

As a result the implement may drop and be damaged,

and people in the immediate vicinity may be injured.



The top link must always be secured.



Never stand in the immediate vicinity of the implement when the

implement is raised.

The position of the top link (1) can be ad-
justed as follows:



Lower the implement completely.



Switch the hydraulic system for the trac-

tor's three-point linkage to position con-
trol.



Activate the hydraulic system for the

tractor's three-point linkage until there is
no load on the top link pin (2).



Release the top link pin (2) and pull it

out.



Adjust the length of the top link so that

the top link pin (2) can be fitted in the
position required.



Replace the top link pin (2).



Secure the top link pin (2).

Содержание Heliodor 8









































































































Результаты поиска

Содержание Heliodor 8

Отзывы:

LEMKEN Heliodor 8, Руководство по эксплуатации, Страница: 74 / 104

Результаты поиска

Содержание Heliodor 8

Отзывы: