LEMKEN Heliodor 8 Скачать руководство пользователя страница 12

Страница: 12 / 104

Symbols used in the Operating Instructions

SYMBOLS USED IN THE OPERATING INSTRUCTIONS

2.1 Hazard

classes

The following symbols are used in the Operating Instructions for particularly im-
portant information:

DANGER

Denotes an imminent hazard with high risk, which will result in
death or severe physical injury, if not avoided.

WARNING

Denotes a possible hazard with medium risk, which could result in
death or severe physical injury, if not avoided.

CAUTION

Denotes a low-risk hazard, which could cause light or medium
physical injury or property damage, if not avoided.

2.2 Information

Denotes special user tips and other particularly useful or important
information for operation and efficient utilisation.

2.3 Environmental

protection

Indication of special recycling and environmental protection
measures.

Содержание Heliodor 8









































































































Результаты поиска

Содержание Heliodor 8

Отзывы:

LEMKEN Heliodor 8, Руководство по эксплуатации, Страница: 12 / 104

Результаты поиска

Содержание Heliodor 8

Отзывы: