LEMKEN Heliodor 8 Скачать руководство пользователя страница 34

Страница: 34 / 104

Safety measures and precautions

3.11

Operating the device safely

3.11.1 General information



Before starting work, familiarise yourself with all equipment and actuating ele-

ments as well as their functions.



Do not operate the device until all protective devices have been attached and

are in the safety position.



Always attach the device in accordance with the regulations and only on the

stipulated devices.



Always exercise extreme caution when mounting the device on or removing it

from the tractor.

In the area of the three-point linkage there is a risk of injury from crushing and/or
shearing.



Before mounting the device on or removing it from the three-point linkage, move

the operating equipment into the position which prevents the device from being
uninitentionally raised or lowered.



When actuating the external control for the three-point attachment, do not walk

between the tractor and device.

It is prohibited to be within the hazardous area of the machine and to climb up on
the implement while it is operating.

Содержание Heliodor 8









































































































Результаты поиска

Содержание Heliodor 8

Отзывы:

Похожие инструкции для Heliodor 8

Бренды по названию

Популярные бренды

LEMKEN Heliodor 8, Руководство по эксплуатации

Результаты поиска

Содержание Heliodor 8

Отзывы:

Похожие инструкции для Heliodor 8

Бренды по названию

Популярные бренды