LEMKEN Heliodor 8 Скачать руководство пользователя страница 35

Страница: 35 / 104

Safety measures and precautions

In the wider operating range of the device there is a risk of injury, e.g. from ejected
stones.



Before actuating hydraulic equipment (such as flap devices), ensure that there

is nobody in the flap area. Risk crushing and/or shearing by remote power op-
erated parts.



Never stand between tractor and device. This is only permitted when the tractor

is secured against rolling away by the parking brake and the chocks.



Always keep the device in a clean state to prevent the risk of fire.



Before leaving the tractor, deposit the device on the ground.



Switch off the engine.



Remove the ignition key.

3.11.2 Personnel selection and qualifications



The driver of the tractor must have the appropriate driving licence.



Any work on the device may be carried out by trained and instructed personnel

only. Personnel must not be on drugs, intoxicated or taking medication.



Servicing and maintenance work may be carried out by trained technicians or

appropriately instructed persons only.



Only electricians may work on the electrical components in accordance with the

electro-technical regulations.

Содержание Heliodor 8









































































































Результаты поиска

Содержание Heliodor 8

Отзывы:

Похожие инструкции для Heliodor 8

Бренды по названию

Популярные бренды

LEMKEN Heliodor 8, Руководство по эксплуатации

Результаты поиска

Содержание Heliodor 8

Отзывы:

Похожие инструкции для Heliodor 8

Бренды по названию

Популярные бренды