![background image](http://html1.mh-extra.com/html/lemken/heliodor-8/heliodor-8_operating-instructions-manual_1875043041.webp)
Preparation of the Tractor
39
6
PREPARATION OF THE TRACTOR
6.1 Tyres
The pressure - especially in the rear tractor tyres - must be equal. In heavy condi-
tions it may be necessary to add wheel weights and/or water ballast. (See manu-
facturer’s instructions).
6.2 Lift
Rods
Adjust lift rods to equal length. (See manufacturer’s instructions).
6.3
Check chains/stabilisers on the three-point linkage
The check chains or stabilisers must be set so that
they provide sufficient lateral movement of the tractor's lower links during opera-
tion
the implement runs centrally behind the tractor
6.4
Required power sources
CAUTION
Damage to electrical components
The tolerance range for the power supply is between 10 V and 15
V. Overvoltage and undervoltage may result in malfunctions and
under certain circumstances may destroy electrical or electronic
components.
Ensure that the power supply of the device is always within the
specified tolerance range.
The following power sources are required on the tractor for the electrical consum-
ers:
Consumer
Volt
Direct connection
to
the
tractor bat-
tery
Power socket
Lighting system
12
-
In accordance with
DIN-ISO 1724
Содержание Heliodor 8
