LEMKEN Heliodor 8 Скачать руководство пользователя страница 48

Страница: 48 / 104

Attaching the implement

DANGER

Danger to life due to unsecured connection between lower
link and drawbar

If the connection between lower link and drawbar is not secured,
the pintle of the drawbar may slip out.

As a result, the implement may fall down and injure or kill people
in the immediate vicinity.

As a result, other road users may be injured or killed while the im-
plement is being transported.

The connection between lower link and drawbar must always be
secured.

Nobody may be in the immediate vicinity of the implement when it
is lifted out.

8.1 Attachment



When attaching the implement, switch

the hydraulic system for the tractor's
three-point linkage to position control.



Reverse the tractor up to the implement

so that it is lined up immediately in front
of the implement and the catch hooks on
the lower links can be coupled with the
cross shaft (1). Stop at a distance of ap-
prox. 40 cm from the implement.



Secure the tractor so that it does not roll

away.

Содержание Heliodor 8









































































































Результаты поиска

Содержание Heliodor 8

Отзывы:

Похожие инструкции для Heliodor 8

Бренды по названию

Популярные бренды

LEMKEN Heliodor 8, Руководство по эксплуатации

Результаты поиска

Содержание Heliodor 8

Отзывы:

Похожие инструкции для Heliodor 8

Бренды по названию

Популярные бренды