LEM Saturn 100 Plus, Руководство по эксплуатации, Страница: 14 / 329

Measuring
12
To start a new measurement, select function and press key
R
„Start“ (see
POWER-ON - Normal Operation)
Settings Loop After operating the function selector, the control loop is entered,
where from the complementary values can be called by pressing „DISPLAY“.
The following parameters depending on the function can be displayed.
Function: Display:
FI-Test,
,
x5 UL-PE, UN-PE, Frequency
with probe UL-PE, UN-PE, US-PE, Frequency
RA UL-PE, UN-PE, US-PE, Frequency
RISO, L-PE; N-PE UL-PE, UN-PE, Frequency
L-N UL-N, Frequency
RLOOP,L-N UL-N, Frequency
L-PE
UL-PE, UN-PE, Frequency
with probe UL-PE, UN-PE, US-PE, Frequency
U1-3, U2-3, Frequency
R UL-N, Frequency
Results Loop This is entered by pressing „START“ key. By repeated pressing of
the „DISPLAY“ key, all complementary values can be displayed.
Function
Display:
FI-Test,
,
x5 UL; RS; tA
with probe UL; RA; tA
RA
RA
RISO RISO, U-discharging voltage
RLOOP L-N, L-PE
RS; IK; UN
L-PE with probe RS; IK; US-PE; UN
U1-3; U2-3; Frequency
R R1; R2 con and 2 Ohm with continuity test, respectively