Page 4
2018-06-08
LABvault-SD
Back Panel
A: Power cord connector
B: 1 RS-232 Serial Port for External Control System
C: 1 RJ-45, 10/100 BASE-T Ethernet port with corre-
sponding LED indicators
D: 1 BNC video input connector
E: 1 BNC video output connector
F: 2 RCA audio input connectors (left & right)
G: 2 RCA audio output connectors (left & right)
BACK PANEL
The LABvault-SD back panel, includes, from left to right, top to bottom:
A
B
C
D E
F G
Not Used
ORIGINAL LABVAULT-SD BACK PANEL
A: Power cord connector
B: not used
C: 9-pin male RS-232 DTE connector for control by
a compatible third party system, such as a AMX or
Crestron touch screen
D: 1 RJ-45, 10/100/1000 BASE-T Ethernet port with cor-
responding LED indicators
E: 1 BNC video input connector
F: 1 BNC video output connector
G: 2 RCA audio input connectors (left & right)
H: 2 RCA audio output connectors (left & right)
The LABvault-SD back panel, includes, from left to right, top to bottom:
Not Used
VERSION 2 OF THE LABVAULT-SD BACK PANEL
A
B
C
D
E F
G H
There are two versions of the LABvault-SD, which have different back panels, supported network connectivity speeds,
and internal hard drive sizes. The original LABvault-SD, no longer available, has a back panel matching the first of the
pictures shown below, supports 10/100 BASE-T Ethernet, and has a 120 GB internal hard drive. The current LABvault-SD
model, version 2, has a back panel matching the second picture below, supports 10/100/1000 or gigabit BASE-T Ethernet,
and has a 250 GB internal hard drive.
