LABvault-SD
Front Panel
Page 3
2018-06-08
KEYPAD
The four LABvault-SD arrow keys are used to display status information as well as for the entry of TCP/IP network
addresses.
If you hold down an arrow key for more than one second, it begins to scroll through all of the available
options. Release the key when the desired option is displayed.
The front panel keypad also turns the LABvault-SD on/off. Note that the LABvault-SD automatically turns on when the
unit is plugged in.
When held for four seconds, the red “X” button turns off
the LABvault-SD. If the LABvault-SD has been turned off, press the green
check push button for two seconds to turn the unit back on.
LEDS
The LABvault-SD front panel has two status, light-emitting diodes (LEDs)
for at-a-glance feedback. The red “Record” LED lights up when the LABvault-SD is encoding. The blue “Play” LED
lights up when playback on the LABvault is activated.
DISPLAY
The LABvault-SD display shows status and password-protected TCP/IP address entry screens. Once the LABvault-
SD has been booted up, press the up or down arrows on the keypad to display the following status screens:
11/03 12:00:00PM
SN:B923D1 V01.00
Serial Number & Firmware Version
Firmware Date
IP Address
LABvault-SD Identification
11/03 12:00:00PM
FW Blt:10/31/08
11/03 12:00:00PM
IP:10.9.0.1
11/03 12:00:00PM
ID:LABvault-SD
MPEG Recorder Status
11/03 12:00:00PM
Recorder Stopped
Bios Date
11/03 12:00:00PM
Bios:02/14/08
FRONT PANEL
BEFORE
unplugging or
removing power from the
LABvault-SD, shut down the
unit from its front panel.
Transfer Status
11/03 12:00:00PM
NX: 0.8591GB 2%
Indicates file transfer destination and progress.
If more than one destination is selected for
a transfer, the screen only shows the first
destination to which the LABvault-SD sends the
file. Changes to “Send Idle” when there are no
active file transfers.
Processor Temperature
11/03 12:00:00PM
Temp: 42
°
C
PStat Firmware Version
11/03 12:00:00PM
PStat Ver:66.03
Displays the firmware version for the
front panel status LEDs.
MPEG Player Status
11/03 12:00:00PM
MPEG Player Stop
Build Number
11/03 12:00:00PM
Bld Num:427
