LABvault-SD
Web Interface
Page 17
2018-06-08
• Files manually transferred from an external control system will be automatically deleted off
the LABvault-SD’s hard drive, regardless of whether or not the “Automatic Delete” setting
has been selected in the Web interface.
• “
File Quality
”: select a “File Quality” recording preset for your files. Each recording quality preset represents the
range of bit rates within which the file will be recorded.
NOTE:
If you selected a LEIGHTRONIX streaming Web site (“Internet VOD Streaming”) as an automatic
file transfer destination, your files will be recorded
at the “Streaming” setting
for all selected file
desti
nations. The “Good,” “Better,” and “Best” file record quality settings will be ignored.
• “
PEGcasting
”: if you want your LABvault-SD files transferred to your NEXUS series server 15 seconds after the
files begin recording, select the “Enable” “PEGcasting” option. To use the PEGcasting Next to Live autoplay feature
for simulated live broadcasting, you must still complete the “PEGcasting N2L” configuration settings on the “NEXUS/
UltraNEXUS” tab.
• “
Closed Captions
”: Select the “Enable Closed Captions” option to capture any closed caption data from the source.
Closed captions are hidden in the video signal and decoded for display on televisions with built-in decoders or
televisions connected to external decoders.
Recording from the Web Interface
Start/Stop recording and add index points to your files through the LABvault-SD’s Web
interface as follows:
1. From the “MPEG Recorder” panel under the menu buttons or from the “MPEG Engine
Control” panel on the bottom of the “File Management” screen, click the record
button
to begin recording.
2. LEIGHTRONIX LGX-SVOD and Internet VOD Streaming Service Users
Only
: add video
index points for use in PEG Central or other LEIGHTRONIX VOD streaming application.
Index points appear as links next to the published video in the streaming application’s
player window, allowing viewers to quickly move to points of interest within the video.
Either enter a custom name (20 characters maximum) for your index points into
the name field below the “Stop” record button or leave it blank and the LABvault-
SD will use the current date/time as the name. Each index point also indicates the
hours:minutes:seconds into the video that it marks. When you have chosen your naming
method, click the “Set Index” button to add an index point to the recording file. Create
additional index points at key intervals in the recording with each click of the “Set Index”
button. If a custom name was entered, each additional index point will be assigned the
same custom name until the name field is reset. To add an index point with a new custom
name, click the “Clear Index” button and then type a new name into the name field before
clicking the “Set Index” button.
3. To end the recording session, click the stop
recording button. If a file destination
was configured and enabled in the Web interface, your recorded file will be automatically
transferred to the destination.
Left Column
“MPEG Recorder” Controls
“MPEG Engine Control” Panel
Record Button
Stop Button
