Leica BIOSYSTEMS HistoCore BIOCUT, Инструкция по эксплуатации

Страница: 30 / 90

30 Version 1.7, Revision K
Setting up the instrument
4
Fig. 10
3
2
1
5
6
7
8
The feather key (
→
"Fig. 10- 2 ") is loosely placed in the handwheel shaft (
→
"Fig. 10- 1 ") and fixed in place
with a cable tie during transport.
1. Remove the cable tie ( → "Fig. 10- 3 ") .
Caution
The feather key is lost when mounting the handwheel.
The instrument cannot be used, and it may cause the delay of diagnosis.
• Before assembling the handwheel, check the feather key and make sure that it is in the
handwheel shaft.
2. Place the handwheel (
→
"Fig. 10- 5 ") on the handwheel shaft (
→
"Fig. 10- 1 ") as shown.
3. Tighten the screw (
→
"Fig. 10- 6 ") located in the center hole of the handwheel with a Hexagon
key No. 4 (
→
"Fig. 10- 7 ") .
4. Remove the cover foil from the self-adhesive cover disk (
→
"Fig. 10- 8 ") and fix the cover disk on
the handwheel.