Leica BIOSYSTEMS HistoCore BIOCUT Скачать руководство пользователя страница 13

Страница: 13 / 90

HistoCore BIOCUT

Safety

Warning

Personnel with insufficient qualification working with the instrument.

Serious injury of persons and/or specimen damage can occur when specimen approaches knife/

blade due to inappropriate operator actions, for example, because object head may drop onto knife

holder when handwheel is unlocked.

• Always make sure that only laboratory personnel with dedicated and sufficient training and

qualification operates the instrument.

• Always make sure that all laboratory personnel designated to operate this instrument has read

these Instructions for Use carefully and is familiar with all technical features of the instrument

before start working with it.

Warning

Protective devices or safety accessories provided by manufacturer have been removed or modified.

Serious injury of persons and/or property damage including specimen damage.

• Never remove or modify any protective devices of the instrument or any accessories. Only service

personnel qualified by Leica Biosystems may repair the instrument and access the instrument's

internal components.

• Before working with the instrument always assure that all protective devices and safety

accessories are in place and fulfill their purpose properly.

Warning

Personal protective equipment is not used.

Injury of persons.

• When working with microtomes, personal safety precautions must always be taken. It is

mandatory to wear work safety shoes, safety gloves, a mask and safety goggles.

Warning

Knives or blades are handled and/or disposed in an inappropriate manner.

Serious injury of persons due to contact with extremely sharp knife/blade.

• Work especially thoroughly and carefully when handling the knife/blade.

• Always wear dedicated clothes (including cut-resistant gloves) when handling knife/blade.

• Dispose knives and blades always in a safe place (for example, dedicated knife case) and an

appropriate manner that ensures that people cannot get hurt.

• Never place a knife anywhere with the cutting edge facing upwards and never try to catch a

falling knife!

• Always clamp the specimen BEFORE mounting and clamping the knife/blade.

Warning

Knife/Blade was not removed when knife/blade holder was uninstalled from the microtome.

Serious injury of persons due to contact with extremely sharp knife/blade.

• Before uninstalling the knife/blade holder from the microtome always make sure to detach the

knife/blade wearing cut-resistant gloves and store the knife/blade in a safe place.

Содержание HistoCore BIOCUT



























































































Результаты поиска

Содержание HistoCore BIOCUT

Отзывы:

Бренды по названию

Популярные бренды

Leica BIOSYSTEMS HistoCore BIOCUT, Инструкция по эксплуатации

Результаты поиска

Содержание HistoCore BIOCUT

Отзывы:

Бренды по названию

Популярные бренды