Leica BIOSYSTEMS HistoCore BIOCUT Скачать руководство пользователя страница 27

Страница: 27 / 90

HistoCore BIOCUT

Setting up the instrument

Warning

Instrument is lifted inappropriately.

Serious injury of persons and/or property damage.

• When lifting the instrument touch it only at the lifting points described in the Instructions for Use

and Unpacking Instructions (base plate at the front and under the instrument on the back).

• Do not transport the instrument by holding it by the handwheel grip, coarse feed wheel or the

knob for setting the section thickness.

• Always remove the section waste tray before transporting the instrument.

Warning

Careless moving of the instrument.

Serious injury of hands and/or fingers due to getting crushed between instrument and working

surface.

• When moving the instrument, touch it only at the lifting points described in the Instructions for Use

and Unpacking Instructions (base plate at the front and under the instrument on the back).

• Thoroughly pay attention that hands do not get between instrument and working surface.

Warning

Instrument not positioned safely with all 4 feet on an appropriate laboratory table.

Serious injury of persons and/or property damage.

• Put the instrument only on a stable, vibration-free laboratory table with horizontal, flat table top.

Ground needs to be vibration-free as far as possible.

• Always make sure that all 4 feet are positioned completely on the laboratory table.

• If the instrument has been potentially moved by other persons (for example for servicing) always

double-check correct positioning.

Caution

Accessories/components loosening/damaged during transportation.

Property damage or delayed diagnosis.

• The packaging has the ShockDot Impact Indicator, that indicates improper transport. When the

instrument is delivered, check this first. If the indicator is triggered, the package was not handled

as prescribed. In this case, please mark the shipping documents accordingly and check the

shipment for damage.

Tip

The transport carton and included retaining elements should be kept in case a return shipment is

necessary later. To return the instrument, follow the instructions below in reverse order.

Содержание HistoCore BIOCUT



























































































Результаты поиска

Содержание HistoCore BIOCUT

Отзывы:

Бренды по названию

Популярные бренды

Leica BIOSYSTEMS HistoCore BIOCUT, Инструкция по эксплуатации

Результаты поиска

Содержание HistoCore BIOCUT

Отзывы:

Бренды по названию

Популярные бренды