background image

Group 3 

Accident prevention 

Page 25 

Release 3.00 

 

Leibinger-Jet 2 se 

 

3. Accident prevention

 

 

 
The following presentation shows the measures in the event of an accident with 

ink

 and 

solvent

 with the 

danger marking

 

slightly ignitable 

irritates the eyes and the respiratory organs. 

 

3.1 Storage and handling (normal use)

 

 

  
 

GENERAL 

These products must only used at points that are free from open 
flames and other ignition sources. Do not use pressure for 
emptying – the container is not a pressure vessel. Good household 
practice and regular, safe removal of the waste materials restrict 
the danger of self-ignition and other risks of fire to a minimum. The 
product can charge statically. When pouring from one container to 
another use a mass lead. The workers must wear anti-static shoes 
and clothing and the floors must be conductive.  
 

 

STORAGE 

Observe the marking information. Store at 5 to 25°C in a warm, well 
ventilated location at a safe distance from heat and ignition sources 
and direct sunlight. 
 

Do not smoke!

 Do not grant access to unauthorised persons. 

Open containers must be properly closed and stored upright in 
order to avoid leakage.  
 
Smoking, eating and drinking must be forbidden in the storage and 
working areas. Always keep in containers from the same material 
as the delivery containers. 
 

 

HANDLING 

The development of combustible or explosive vapour 
concentrations must be prevented and vapour concentrations 
avoided that are above the threshold values of the employers 
liability insurance association. Keep containers closed tightly.  
 
Keep sources of heat and sparks as well as open flames well away. 
 
Use only spark-free tools. Electrical devices must be protected in 
accordance with the corresponding standard. 
 
Avoid contact with the skin and eyes. Do not inhale vapours and 
spray mist. 

 

Содержание Jet 2



















































































































































































Отзывы: