Leibinger Jet 2, Руководство пользователя

Страница: 114 / 178

Group 7 Data Entry Page 114
Release 3.00 Leibinger-Jet 2 se
7.7.3 Encoder
Figure 90
The touch field
<encoder> (159) de-
activates or activates this.
At the same time the current status
„with“
or „without“ is displayed.
With encoder print is possible in one or in
both directions.
7.7.4 Encoder parameters
Figure 91
The current status is displayed in all fields.
The touch field
<encoder set-up> (160)
controls the basic settings of the encoder.
The “selection level”
<E14> is opened.
With the touch field
<lock backward>
(161) the return barring is activated or
deactivated.
If the return barring is switched on the
strokes that are created during any
backwards movement are taken into
consideration in ensuing forwards
movement to control the correct insertion of
the text print-out.
With the touch field <encoder directi.> (162) a choice can be made between direction of
rotation to the left or to the right. Encoder signals are only evaluated with a correctly set
direction of rotation.
The touch field
<width> (163) controls the print width of the print-out. The modes
“normal” and “extra” are available for selection. In the “extra” mode the print width is
doubly wide. Only possible with the “without encoder” setting.
Observation: In the “normal width” mode the device works at a rapid stroke rate, with
“extra width” (extra wide) at a lower stroke rate.
[E8]
159
160
[E8]
163
[E14]
164
162
161