Leibinger Jet 2, Руководство пользователя

Страница: 115 / 178

Group 7 Data Entry Page 115
Release 3.00 Leibinger-Jet 2 se
With the touch field <Pulses per mm> (164) the pulses/revolution indicated on the
encoder can be multiplied by the factor 4 and following the multiplication they can be
divided by the distance determined for one revolution.
7.7.5 Job change
Figure 92
By switching over to the touch field
<JobChan> (170) from “internal” to
“ external” the possibility is given of
changing between 128 jobs during
production by means of an external signal.
If the
“internal” mode is activated external
signals for a job change are ignored.
Observation: With activated external job change, jobs can only be edited with a closed
noozle. To change a job by external signals the head must be open. A
corresponding signal from the SPC is required.
At the same time the current status “internal” or “external” is displayed in the field.
7.7.5.1 Printing with the function “external job selection”
For the usage of the function “external job selection” the printer has to be
prepared as follows:
1.) Delete all jobs:
Please push the following order of buttons:
!
“main menu”
!
“job management”
!
“delete jobs”
!
“all jobs”
!
”YES”
2.) Create 128 Default-jobs:
Please push the following order of buttons:
!
“main menu”
!
“function parameter”
!
“replacements”
!
“replace figures”
!
“ESC”
!
“Job management”
!
“Factory setting
& default job”.
After these steps 128 default-jobs have been created automatically (see under “main
menu”
!
“job management”
!
“list all jobs”).
The jobs are numbered all the way through with names from “001” up to “128” and
the function “external job change” is activated in the single jobs.
(This is necessary that no undefined job can be selected by switching over the inputs
and that in every job the function “external job change” is already activated).
[E8]
170