LEHNER Vento II, Инструкция по эксплуатации со списком запасных частей

Страница: 32 / 74

Operation
32 / 74 1.0 Vento
®
II
4.5.9 Working width
1. Select "Working width" menu point.
Working width
6.0
m
The current working width will be displayed.
2. Turn the turn-and-push button to change the work-
ing width.
3. Confirm your selection by pressing the turn-and-
push button.
The entry will be confirmed.
The main menu will be displayed.
4.5.10 Residual discharge
Caution!
Risk of environmental pollution due to incorrect handling of fertilisers!
Comply with regulations and laws of the country in question.
Make sure that no fertiliser is spilled onto the ground.
Comply with the instructions from the fertiliser manufacturer regarding handling, storage and
disposal of the fertilisers.
Advice
To avoid damage to property after completing work, always perform a complete residual discharge of the
spreader.
Even if a visual inspection indicates that the spreader is empty, it can be expected that there will still be a quantity
left in the spreader.
The residual amount of granulate must be collected in containers with a sufficient capacity.
Empty larger amounts through the residual discharge hatch, see
Chapter 5.2, "Spreading material hopper" .
Residual discharge for smaller amounts:
1. Pull off all hoses on the spreader.
2. Place a container under the outlets.
3. Select "Residual discharge" menu point.