1997-2001 FLH Renegade– Rev. 3
Neck Race Preload,
Steering head should be approximately twice as tight as factory specifications for a trike conversion.
Refer to H-D service manual for adjustment procedure.
Caution: Do not tighten bolts past factory specifications. Only bearing adjustment collar should
be tightened past factory settings.
Adjusting Motor Mounts
The front and top motor mounts may need to be adjusted to achieve correct vertical alignment, and to
center differential housing to frame. To do this, trike must be sitting on a level surface. Refer to H-D
service manual for correct procedure on adjusting motor mount assemblies.
35
