1997-2001 FLH Renegade– Rev. 3
11
10. Link should run horizontal to motorcycle. Be sure to shim both sides of link end with supplied shims
and use OEM spacer
(Fig.’s 4 & 5).
11. Tighten all bolts to factory torque specs (
frame-22 ft.-lbs., engine-33 ft.-lbs.)
12. Check for any interference of motorcycle parts (wire harnesses, air hoses, etc.).
13. Reroute any wire harnesses around or behind bracket. The coil wire on a fuel-injected model will
run over top edge of bracket.
Note: Make sure harnesses are not pinched when fuel tank is reinstalled.
Fig. 5
