1997-2001 FLH Renegade– Rev. 3
5.
See Fig. 5
. Install license plate bracket to door with
1/4” x 1” bolts, washers, lock nuts and rubber wash-
ers. Use rubber washers between bracket and
door. Install U-nuts to bracket
•
(2) 1/4” x 1” Button head bolt (CB1086)
•
(2) 1/4” Rubber washer (FG1002)
•
(2) 1/4” Flat washer (CW2005)
•
(2) 1/4” Lock nut (CN3040)
•
(2) 1/4” U-nut (CN3301)
6.
See Fig. 6.
Install license plate light and support
plate to bracket using (2) 1/4” x 1 bolts.
See Fig. 5
. Run wiring through lower hole in door .
•
(1) License plate light (S001469)
•
(1) Support plate (S001601)
•
(2) 1/4” x 1 Button head bolt (CB1086)
•
(2) M6 Flat washer- CW2175
7.
See Fig. 6
. Install lower license plate mounting
hardware into place on support bracket using 1/4”
x .50” bolts and (2) lock nuts
•
(2) 1/4” x .50 Button head bolt (CS4032)
•
(2) 1/4” Lock nut (CN3040)
8. Solder and heat shrink light wiring to trunk wiring
harness. Attach wire as follows-
•
White
wire on light to
Black
wire on trunk
harness
•
Gray
wire on light to
Red
wire on trunk
harness
9. Seal wiring through door with silicone (Ultra Black).
25
Fig. 5
Fig. 6
Install rubber washers
between bracket and door
Install wire through lower hole
U-nut
