1997-2001 FLH Renegade– Rev. 3
Final Assembly
1. Install seat to fender using original H-D mounting hardware.
Note: Make sure insert in fender is free of paint before installing screw.
2. Install wheels. Torque wire wheel lug nuts to
75 ft.-lbs
. and aluminum wheel lug nuts to
85 ft.-lbs.
Install center caps (if applicable).
Caution: Do not use an impact wrench when installing lug nuts.
3. Reflectors can be installed to body.
See Fig. 1.
Install rear reflectors 3” below taillights on body.
See Fig. 2
. Install side reflectors using wheel center caps as a reference, 1/4” above wheel opening
on body.
34
Fig. 1
Fig. 2
