1997-2001 FLH Renegade– Rev. 3
12
Head Bolts and Front Motor Mount
FLH Head Bolts
1. Remove existing 3/8” bolt, lock washer and flat washer that holds engine stabilizer bracket to en-
gine.
2. Apply blue Loctite 242 to threads of 3/8” x 1 1/4” hex flange-locking bolt.
3. Assemble bolt, spacer (LS1189) and external tooth lock washer in appropriate order.
4. Torque bolt to
42 ft.-lbs.
5. Reinstall gas tank according to H-D service manual once top motor mount glue is fully cured.
FLH Lower Engine Mount Bolt
1. Remove 3/8” bolt; lock washer and flat washer that holds engine stabilizer to engine.
2. Apply blue Loctite 242 to threads of 3/8” x 1 1/2” hex flange-locking bolt.
3. Install 3/8” x 1 1/2” flanged bolt and original washer. Torque bolt to
42 ft.-lbs.
4. On same bolt, install 3/8” supplied locknut and torque to
38 ft.-lbs.
5. Remove bolt, lock washer and flat washers that hold stabilizer to frame.
6. Apply Loctite to supplied 3/8” x 1 1/2” flanged head bolt. Install supplied bolt with original flat wash-
ers to frame. Torque bolt to
42 ft.-lbs.
7. Remove front engine mount; apply Loctite to threads and re-install nut. Torque bolt to
45-54 ft.-lbs.
