10
Room Assignment
19. Highlight the building name to enable the
Add Area
and
Add Room
buttons, then click
Add Room
. A dialog pops up. Enter the
room name and click
OK
. Repeat, adding as many rooms as desired. You can also click
Add Area
to name and add areas. You
can then drag and drop the rooms into the areas, exactly the same as when creating areas and rooms in the Devices tree.
20. Once the rooms are created, click on a room to select specific devices to add to that room. As you add devices to a room and the
click on another room, those devices are removed from the list since they are no longer unassigned.
NOTE:
A room cannot contain both a wireless room controller and an LMBC-650 wireless bridge. (You can, however have multiple
room controllers in a room.) If you select a room controller for a room and then select an LMBC-650 while on that same
room, the room controller will be deselected, and vice versa. Wireless switches and sensors
are
available to assign to a
room with an LMBC-650, because wireless switches and sensors can be used to control a wired room controller.
NOTE:
It is not necessary to assign all devices to rooms at this point, if you are not certain where you want devices assigned.
Once the wizard is completed, you can move devices into rooms within the Device tree and then pair them when viewing
the room from the tree. For details, see
“Adding Unassigned Devices to a Room and Pairing Them” on page 13
.
21. Once all devices have been assigned, click
Next
. LMCS displays a summary of the devices that will be paired. Click
Apply.