12
Read Devices
25. Wattstopper recommends at this point that you read information from all devices in the project. This will read in the default wireless
scenes that are created automatically when devices are paired, along with any other current values for device parameters. Click
Read
in the
Commission
section of the top ribbon. The
Read Options
dialog opens. Leave all checkboxes selected.
Read Options
26. Click
OK
. The
Read Devices
dialog displays the progress of the read and a log provides information. When the read is complete
click
Close
.
Read Devices
27. If you expand the Devices Tree now, you will see the rooms you created and the devices assigned to those rooms. If any devices
were not assigned to a room during discover, it will be included in a special “room” labeled Unassigned. You can also see a list of
these devices if you click the
Unassigned
tab at the bottom of the tree.
