background image

14

1 YEAR, 3 YEAR AND 10 YEAR LIMITED WARRANTY

In this warranty: “

Adjustable base

” means the adjustable bed foundation sold by L&P to the dealer.  The “adjustable base” does 

not include the mattress. “

L&P

” means Leggett & Platt, Incorporated. “

Purchaser

” and “

You

” both mean the consumer who 

is the original purchaser of this adjustable base made by L&P.  This warranty is not transferrable. “

Warranty Commencement 

Date

” means either (i) the date You purchased a new and unused L&P adjustable base or (ii) the date of manufacture of this 

adjustable base if You purchased an L&P adjustable base that has been used as floor or display model. A “replacement part” is 
a new or used part selected at the sole discretion of the manufacturer, including a refurbished or reinspected part, provided in 
replacement of a part previously incorporated in the adjustable base. L&P warrants this adjustable base to You on the terms and 
over the reducing periods of time set out below. All warranty claims require notice from You to be given to L&P in the manner set 
out below, and to be received by L&P inside the applicable warranty time period.  

 

1ST YEAR FULL WARRANTY

For the first year from the Warranty Commencement Date, 
your adjustable base is warranted against non-excluded 
defects in L&P’s workmanship or materials. During the 
first year from the Warranty Commencement Date, L&P 
will repair or replace (at no cost to You) any defective 
adjustable base part, and L&P will pay all authorized labor 
and transportation costs associated with the repair or 
replacement of any parts found to be defective.

2ND & 3RD YEAR LIMITED WARRANTY

During the second and third year from the Warranty 
Commencement Date, L&P will replace any adjustable 
base part found to be defective and not excluded by 
this warranty. You are responsible to pay all service and 
transportation costs related to the costs of receiving and 
installation of the replacement part.

4TH YEAR TO END OF 10TH YEAR LIMITED WARRANTY

Starting in the fourth year from the Warranty 
Commencement Date and through to the end of the 
10th year from the Warranty Commencement Date, L&P 
will replace steel and mechanical base parts found to 
be defective and not excluded by this warranty. 

This 

warranty does not cover any electronics, electrical 

components, drive motors or massage motors.

 You are 

responsible to pay all service and transportation costs 
related to receiving and installation of the replacement 
part and a portion of the cost of the replacement steel 
and mechanical part, based on the number of months 
that the base has been owned by you since the fourth 
anniversary of the Warranty Commencement Date. By the 
end of the 10th year, no portion of the replacement cost 
is covered by L&P. You will be required to pay 1/7th of 
the then current replacement cost of the part multiplied 
by the number of years past the third year from the 
Warranty Commencement Date. This portion is calculated 
using the following formula: Cost of the replacement 
part divided by 7 [being the number of years in years 4 
to 10 inclusive], multiplied by the number of years you 
have owned the base since the end of the first 3 years. 
For example, if you make a claim for a replacement 
part eligible for this warranty in the 5th year since the 
Warranty Commencement Date, you would be responsible 
for paying: $100 part cost divided by 7, multiplied by 2 = 
$28.57.

ADDITIONAL TERMS AND CONDITIONS

This warranty requires notice to be given to L&P of any 
claim for repairs or replacement parts.

EXCLUSIONS:

This warranty does not apply; (a) to any damage caused 
by You; (b) if there has been any repair or replacement 
of adjustable base parts by an unauthorized person; (c) 
if the adjustable base has been mishandled (whether 
in transit or by other means), subjected to physical or 
electrical abuse or misuse, or otherwise operated in any 
manner inconsistent with the operation and maintenance 
procedures outlined in the Owner’s Manual and this 
warranty; (d) to damage to mattresses, fabric, cables, 
electrical cords or items supplied by dealers (contact the 
dealer for warranty information on these items); (e) if 
there has been any modification of the adjustable base 

without prior written consent by L&P

; or (f) to costs for 

unnecessary service calls, including costs for in-home 
service calls solely for the purpose of educating You 
about the adjustable base or finding a satisfactory power 
connection.  
This warranty will be void if either the recommended 
weight restriction is not followed (refer to the advisory 
section of the Owner’s Manual) or if You sell or give or 
transfer the base to another person.
Any repairs to or replacement to Your adjustable base or 
its components under the terms of this limited warranty 
does not extend the applicable warranty from the Warranty 
Commencement Date. This time limitation may not apply 
in some jurisdictions, including the Province of Quebec.    
The decision to repair or to replace defective parts under 
this warranty shall be made, or cause to be made, by L&P 
at its option and in its sole discretion.

Continued on next page...

Содержание Plymouth K-132

















Отзывы: