Leggett & Platt Plymouth K-132, Руководство пользователя

Страница: 7 / 16

7
STEP 4
Screw the (6) legs into the leg plates on the base frame (FIGURE 3). Tighten
securely.
Use push pin to adjust leg height (7 to 10 inches).
Note: Leg height must be
at least 7 inches. DO NOT use the first pin hole (FIGURE 3).
ASSEMBLY
STEP 5
Rotate the base over onto its legs.
STEP 6
Cut and remove (2) RED zip-ties at head end of base
(one on each side) (FIGURE 4).
DUE TO RISK OF INJURY, TWO ADULTS
ARE REQUIRED TO HANDLE AND MOVE
ADJUSTABLE BASE.
WARNING
!
FIGURE 3
PIN
DO NOT USE FIRST
PIN HOLE. LEG
HEIGHT MUST BE
A MINIMUM OF 7
INCHES.
FIGURE 4
CUT AND REMOVE
RED ZIP-TIES