background image

15

1 YEAR, 3 YEAR AND 10 YEAR LIMITED WARRANTY

Repair or replacement shall be the sole remedy of the 

Purchaser. There shall be no liability on the part of L&P 

for any special, indirect, incidental, or consequential 

damages or for any other damage, claim, or loss not 

expressly covered by the terms of this warranty.

This limited warranty does not include reimbursement for 
inconvenience, removal, installation, setup time, loss of 
use, shipping, or any other costs or expenses. L&P and 
its service technicians will not be responsible for moving 
furniture or any other items not attached to the adjustable 
base in order to perform service on the adjustable base.
It is the sole responsibility of You to provide adequate 
space and accessibility to the adjustable base. In the 
event that the technician is unable to perform service due 
to lack of accessibility, the service call will be billed to 
You and the service will have to be rescheduled. 

L&P makes no other warranty whatever, express or 

implied, and all implied warranties of merchantability and 

fitness for a particular purpose are disclaimed by L&P and 

excluded from this agreement.

Some American States do not allow the exclusion or 
limitation of incidental or consequential damages, so the 
above limitation or exclusion may not apply to You.
This warranty gives You specific legal rights, and You may 
also have other rights, which may vary from jurisdiction 
to jurisdiction. This warranty is valid in all 50 American 
States, the District of Columbia, Puerto Rico, and all 10 
Provinces and 3 Territories of Canada. 
For customer service under this limited warranty, give 
notice to L&P by mail, phone, email or online to the 
addresses set out below:

Leggett & Platt, Incorporated

PO Box 668

Lexington, North Carolina 27293

toll free phone: 1.800.888.3078

online: lpadjustablebases.com

PLEASE DO NOT CONTACT YOUR RETAIL DEALER 

OR ANY OTHER SERVICE PERSONNEL

Содержание Plymouth K-132

















Отзывы: