Leggett & Platt Plymouth K-132, Руководство пользователя

Страница: 8 / 16

8
ASSEMBLY
STEP 7
Install 2-AAA batteries in the remote control. Operate remote control
to verify base functions properly. If base does not operate, see the
Troubleshooting section.
Note: Refer to Remote Control User Guide for
programming instructions.
STEP 8
Lower base to flat position.
STEP 9
Install the mattress retainer. Place one end of the mattress retainer into
the outside hole of the left insert and place the other end into the outside
hole of right insert (FIGURE 5).
LIFT FEATURE
Your base is equipped with a lift setting that allows you to raise the base
on an incline (FIGURE 6).
See Remote Control User Guide for instructions.
STEP 10
Place mattress on base to complete assembly.
MATTRESS
RETAINER
MATTRESS RET
AINER
INSER
TS (FOOT END
OF BASE)
FIGURE 5
FIGURE 6