Power Foundations Owners Manual 99300787-k
14
iNStALLAtiON
d. Position channel connector so that the flat side is flush against
bed base frame. Attach channel connector to bed base frame
using (2) 1½ inch long hex head bolts/nuts (FIGURE 12). Tighten
bolts.
Note: For beds with 74” base length, use inner mounting
holes. For beds with 80” base length, use outer mounting holes
(FIGURES 10 and 12).
use (2) 1½ inch long heX head
bolts and nuts (tighten) to
attach channel connector
to bed base frame
80” base
length
mounting
holes
74” base
length
mounting
holes
adjustable
bed type b
figure 12: bed base type b channel connector attachment.
