Legacy Super Magnum Coal Stoker, Инструкция по установке и эксплуатации

Страница: 35 / 47

6.4 SPECIFIC MAINTENANCE ITEMS
6.4.a Feed Motor
Requires no lubrication – Keep the motor windings free of dust. Can
be wiped clean or vacuumed. To remove feed motor: →
•
Remove rear access panel and open left rear door.
•
Remove feed shaft by pushing with thumb where shown,
and lift while pulling out.
•
Locate the Allen-head set screw on the feed motor shaft
and loosen it.
•
Remove the 4 motor mounting screws and pull the motor
out through the left, rear door.
6.4.b Blower Motor
Requires no lubrication - Keep the motor windings and intake
screen free of dust and pet hair. Can be wiped clean or vacuumed.
To remove combustion blower:
1. Open left rear door.
2. Remove wire-tie from blower power cord.
3. Slide the blower mounting flange out of the bracket toward
the left side.
NOTICE: When re-installing blower, be sure it is slid completely
into the mounting bracket. There is a stop on the right side of the
bracket to ensure proper positioning.
-35-